Please note that firmwares greater than 1.x.4 no longer supports temperature adjustments. The extruder and bed temperatures are hard-coded in the bios. Resetting the filament length work fine. Check the product feedback on this site from other users and the voltivo.com forums for more information. Look at firmware downgrading options on the various forums online before purchasing a resetter if temperature management is something you need to do.


Running out of space in your home-office or at work? Move your davinci 3D printer in any room and connect to it either wirelessly or with a wired ethernet cable to your network. Access it locally or remotely with ease. No XYZWare changes required or new drivers needed. SImply install the free client software in your computer (Windows, Mac and Linux versions available). Watch your printer printing from work (or any location via the internet) using the free myXYZHUB.com website - check it out, it sooo cool! You'll find other XYZHUB owners in there sharing their printing fun!


With the new XYZPRO control panel it will literally take you a few seconds to reprogram and modify your temperatures on the Da Vinci printer. In addition to the new ease-of-use, you will also be able to set multiple profiles for different filaments and save/load them from disk.


The XYZAP+ includes dual temperatures for the bed and extruder and the ability to select PLA or ABS as the material type. It has the added feature of being user-programmable via a standard FTDI programming board. Set the micro switches to your liking for easy switch on-the-fly changeover before flashing your cartridge.
  • 53 Review(s)

    The XYZEROCART is a bluetooth enabled box that connects to your Da Vinci printer and removes the need to have a cartridge permanently inserted in the cartridge bay, freeing up space to use your own spools. Plug and play. Works with Da Vinci Firmware 1.0.G - 1.0.J and Da Vinci 2.0.J (dual cartridge support).

    $94.99
    Add to cart
    Out of stock
  • 42 Review(s)

    Connect your cartridge to your desktop with the XYZPRO interface and gain full control over every byte of your cartridge EEprom!

    $69.99
    In Stock
  • 61 Review(s)

    XYZAP! v2 Fully Assembled & Tested with enclosure and push-button

    $59.95
    In Stock
  • 19 Review(s)

    When the functions of the V2 are not enough, try the V2 PLUS with programmable switches to set your custom temperatures and materials!

    $69.95
    Add to cart
    Out of stock
  • 7 Review(s)

    The XYZHUB appliance allows you to share your DAVINCI 3D printer across your entire network (and Internet if you so wish). *** NOW WITH SUPPORT FOR VIDEO STREAMING ***

    $99.00
    Add to cart
    Out of stock
  • 1 Review(s)

    Add this Video Camera to the XYZHUB and keep an eye on your printer remotely using your web browser.

    $24.95
    Add to cart
    Out of stock
  • 1 Review(s)

    Bluetooth adapter for the XYZEROCART Filament Cartridge Eliminator. It has been tested here to work with Windows 8.1 64/32 Bit, Windows 7, Windows Vista and Windows XP.

    $12.99
    Add to cart
    Out of stock
  • 1 Review(s)

    USB Interface for programming XYZ999, XYZAP! resetters (or just about anything!).

    $13.95
    Add to cart
    Out of stock
  • WCTEK Pro Mini+ is an Arduino Compatible board (same form factor) with up to 128KB of SRAM or 8KB of non-volatile FRAM additional storage on-board!

    $9.95
    Add to cart
    Out of stock
  • 9 Review(s)

    NEW: XYZAP! v2+b Fully Assembled & Tested with enclosure and push-button

    $49.95
    In Stock
  • 2 Review(s)

    The XYZEROCART JR is a stand alone device that connects to your Da Vinci printer and removes the need to have a cartridge permanently inserted in the cartridge bay, freeing up space to use your own spools. Plug and play. Works with most firmware versions as of April 2016. Designed for the  1.0, DUO & AiO printers (dual cartridge support).

    $65.00
    Add to cart
    Out of stock
  • 61 Review(s)

    XYZAP! v2 Fully Assembled & Tested with enclosure and push-button

    $59.95
    In Stock
  • 42 Review(s)

    Connect your cartridge to your desktop with the XYZPRO interface and gain full control over every byte of your cartridge EEprom!

    $69.99
    In Stock
  • 53 Review(s)

    The XYZEROCART is a bluetooth enabled box that connects to your Da Vinci printer and removes the need to have a cartridge permanently inserted in the cartridge bay, freeing up space to use your own spools. Plug and play. Works with Da Vinci Firmware 1.0.G - 1.0.J and Da Vinci 2.0.J (dual cartridge support).

    $94.99
    Add to cart
    Out of stock
  • 19 Review(s)

    When the functions of the V2 are not enough, try the V2 PLUS with programmable switches to set your custom temperatures and materials!

    $69.95
    Add to cart
    Out of stock
  • 5 Review(s)

    Are your circles from the Da Vinci not ... circles? Printing out of symmetry? Increase printing accuracy and remove wobbling on the primary axis with this easy to install KIT. 

    $6.95
    Add to cart
    Out of stock
  • 9 Review(s)

    NEW: XYZAP! v2+b Fully Assembled & Tested with enclosure and push-button

    $49.95
    In Stock
  • 7 Review(s)

    The XYZHUB appliance allows you to share your DAVINCI 3D printer across your entire network (and Internet if you so wish). *** NOW WITH SUPPORT FOR VIDEO STREAMING ***

    $99.00
    Add to cart
    Out of stock
  • 1 Review(s)

    Bluetooth adapter for the XYZEROCART Filament Cartridge Eliminator. It has been tested here to work with Windows 8.1 64/32 Bit, Windows 7, Windows Vista and Windows XP.

    $12.99
    Add to cart
    Out of stock