Software Support for our products

These files are are placed here to assist you with our products and kits. Feel free to download them. Some of the products may be produced by third parties, in these instances, we're either linking (with permission) or providing the file with all/any author copyright notices within. If you're looking for firmware or XYZWare releases, you can check out our online software REPOSITORY for all available releases.


General Tools / 3D CAD Files

Filename Description
XYFWALLzip A quicker way to block XYZWare with your windows firewall. Just follow the instructions in the text file.
XYZPRO_CPNEW.zip Latest version of CONTROL PANEL FOR XYZPRO - supports both 115K and 9K6 models
DAVINCI_1_0_RESET.zip Hardware reset procedure and needed files to downgrade DAVINCI 1.0 (first gen) firmware 1.2.3 to version 1.1.J *** MOST RELIABLE WAY TO DOWNGRADE ***
XYZDowngrader.zip Phil's DA VINCI 1.0 - FIRMWARE DOWNGRADE TOOL. It downgrades your printer's firmware to version J or G (your choice). Tested on Windows 7, but may not always work for every system.
XYZEROCARTCP.zip XYZEROCART Windows Client - use it to set temperatures and filament lengths (use this program once you verified that your XYZEROCART is recognized as a bluetooth device).
XYZPROCP9600.zip XYZPRO Windows Client - use it to set temperatures and filament lengths (use this program once you verified that your XYZPRO is working with the Arduino IDE).
XYZPROCP.zip XYZPRO Windows Client (older version for resetters shipped earlier than Jan 18th 2015) - use it to set temperatures and filament lengths (use this program once you verified that your XYZPRO is working with the Arduino IDE).
CoolTermWin.zip WINDOWS serial terminal program compatible with XYZEROCART. Just install it, run it, select your com port and set it to serial @ 9600 baud
CoolTermMac.zip MAC OSX 1.7 and newer serial terminal program compatible with XYZEROCART. Just install it, run it, select your com port and set it to serial @ 9600 baud
CoolTermMacUniversal.zip MAC OSX 1.6 and older serial terminal program compatible with XYZEROCART. Just install it, run it, select your com port and set it to serial @ 9600 baud
CoolTermLinux.zip LINUX serial terminal program compatible with XYZEROCART. Just install it, run it, select your com port and set it to serial @ 9600 baud
XYZPRO Terminal.zip A simple terminal program to interface with the XYZPRO on Windows.
arduino-1.0.5-macosx.zip Arduino 1.0.5 IDE for Mac/OSX.
arduino-1.0.5-r2-windows.zip Arduino 1.0.5 IDE for Windows 7/8. Just unzip in an empty directory
XLoader.zip HEX Loading program for upgrading the XYZ999, XYZAP! and XYZPRO resetters. 
davinciV1Large.STL 3D STL file for the resetter v1 (to use with the large 0.083" gold pins)
davinciV1Small.STL 3D STL file for the resetter v1 (to use with the smaller 0.056" gold pins)
davinciV2.zip 3D STL files (top cover and bottom carrier) for the resetter v2 with push-button support.

More downloads available. Check out our online software REPOSITORY for Firmware and XYZWare releases.

Error Codes

Error codes (and their meaning) for the Da Vinci printer. Not very descriptive I know, but that all information we could gather from the various files. We'll update this list as we get more feedback...

0011 Heating Error. 
0012 Heating Error. 
0003 Heating Error. 
0014 Heating Error. 
0015 Heating Error. 
0013 Heating Error. 
0040 Storage Error. 
0007 Cartridge 1 Error Please remove cartridge and install again. 
0007 Cartridge 2 Error Please remove cartridge and install again. 
0008 Cartridge 1 Error Please remove cartridge and install again. 
0008 Cartridge 2 Error Please remove cartridge and install again. 
0030 Printer motor Error(X-Axis) 
0031 Printer motor Error(Y-Axis) 
0032 Printer motor Error(Z-Axis)