XYZEROCART

XYZEROCART1

New

The XYZEROCART is a bluetooth enabled box that connects to your Da Vinci printer and removes the need to have a cartridge permanently inserted in the cartridge bay, freeing up space to use your own spools. Plug and play. Works with Da Vinci Firmware 1.0.G - 1.0.J and Da Vinci 2.0.J (dual cartridge support).

More details

Currently out of stock

$94.99

More info

Here is a new addition to our collection of resetters. The XYZEROCART is a bluetooth enable module that connects at the back of your printer in the cartridge bay. you simply snap it in (see videos below) and connect to it using your computer via bluetooth. You can either use a terminal to the correct COM port (9600 Bps, 8/N/1) or the graphical control panel (free download from the DOWNLOAD section on this website). With the new control panel (Windows only), you can set custom temperatures, colors and material to test out your new exotic filaments. Once you're happy with your settings you can save them to disk as a profile. Easly swap filaments by loading your profiles and reflashing the XYZEROCART EEprom.

Of course as always, you can also use the freely available Terminal program on Windows, Mac and Linux computers (get it from the download area) to obtain the same functionality. Press '?' to bring up the help menu and follow the simple menu-driven options.

Video - XYZEROCART: Hardware Installation

Video - XYZEROCART: Bluetooth and Software Installation

Reviews

Grade 
02/22/2016

Very Clever Little Device !

Taken delivery of my zerocart and seems to be doing what it is supposed to.
Very clever little devise.
Thanx for the prompt and efficient service.
I just have to 'play' with it to get a handle on it!
Makes printing better and a pleasure not having to design in material super saving mode.

Grade 
02/16/2016

Da Vinci 1.0A

Works great with my Da Vinci 1.0A Firmware 1.0.6

Grade 
01/08/2016

randomly works

randomly works ... it is very difficult to connect the bluetooth ... usually the computer will not see it ... or will see it and will disconnect in seconds after is connected ...after half an hour of restarts will finally work ... but next time when you have to reset the long you start from the beginning ... if you think you have the time and the nerve may be a good fit ... to me i will rather pay the price of a new cartridge ... whoever is interested i will sell my for half price

Grade 
01/03/2016

A must have product

like another poster on here i was hesitant on purchasing the xyzerocart for my new da vinci duo 2.0A,conflicting posts etc has if it would work with my printer
when on seen the other poster saying his worked i decided to purchase one
i am so glad i did...it works faultlessly
i followed the simple install instructions supplied with it..and i was actually printing in minutes using my own external filament
this is my setup..nothing has been altered or downgraded.
xyzprinting da vinci duo 2.0A
xyz printing software on disc that came with printer 1.1.32.12
system version of printer 1.0.B
I would like to thank wctek.com for the product,plus how fast they built and shipped it to me...total of 6 days for it to be built,processed,shipped to uk
then royal mail had it for 2 weeks
but ofcourse thats out of wctek.com control
so fantastic product,fantastic service from wctek.com
thankyou

Grade 
12/28/2015

Does what is says, with a touch of magic !

Very good piece of hardware. Works like a charm on my AiO 1.0, with firmware 1.1.3.

Delivered to France in something like 10-15 days less than expected... That really was a merry christmas :)

Grade 
12/11/2015

xyzerocart only partially works look again

so i thought this is great too like everyone else. but then i was getting jams. so let me explain, i loaded the xyzeroczrt everything worked it looked good i changed from abs to pla and color and reset and temp ah ha the temp when i monitor from the internal it says it is not getting hotter! infact it stayed exactly where it was but when i look and connect the program it says the eeprom has been changed and should be working to the new settings . so why didn't it change the temperature inside the davinci duo? go with the xyzpro it may work for temps i haven't tried it yet. i asked wctek for help but so far no reply. hope it is a simple download or update i did mention before i bought it i said i was using davinci duo 1.0.B they thought it was going to work it did half and i can do some little stuff but i need to change the temps to use flex filaments at all. like i said they seem to be good people so i hope they help me still.

Grade 
11/27/2015

AIO with firmware 1.1.5

My XYZerocart is working great.
I would recommend it to others.

  • 1 out of 1 people found this review useful.
Grade 
11/24/2015

JR

Bought this item online, shipped to the UK. 20.00 Shipping only to find out I have now got to pay a further £11.00 customs charges. This is not made clear when buying the item.

BEWARE IF BUYING IN THE UK THE CUSTOMS CHARGE IS NOT INCLUDED IN THE SHIPPING!

Grade 
11/09/2015

works fine for me

It works but contact is not good, i have to push it against printer to have good conection, I just put one xyz empty cartrige on it and it works just fine.

  • 1 out of 1 people found this review useful.
Grade 
10/18/2015

XYZEROCART

Arrived in a timely manner and works like a charm.

  • 1 out of 1 people found this review useful.
Grade 
10/15/2015

Awesome product!

Had an issue with my comports and was getting connection errors. Figured it out and now have full functionality. Was able to reset my 1.0 cartridge to 240m successfully. Thanks!

Grade 
10/07/2015

Works Great

My XYZerocart is working great I'm very satisfied with this product and would recommend it to others.

Grade 
09/16/2015

XYZEROCART Success

AIO with firmware 1.1.5
Bought this device and received it fairly quickly, installed easily and as advertised :) I will recommend and use all these products

  • 1 out of 1 people found this review useful.
Grade 
09/16/2015

XYZEROCART

Best buy I did. It is working very well on my DaVince AiO after I figured out where left and right is. However, I still have problems printing PLA - but that has nothing to do with the XYZEROCART. Thanks for producing the part - I'm happy with it!

Grade 
09/03/2015

So far so good!!!

Received my XYZEROCART about a week ago and immediately installed it. I removed the filament cartridge and ran it through the extruder from outside the printer with no issues. I did have a small problem installing the software, probably my fault. The program showed it was looking for the printer on COM4 and it was actually on COM6.

Grade 
08/19/2015

Great bypass of the proprietary filament

I bought this not knowing if it would work on the aio with 1.1.5 and to my delight it did work. I couldn't control temps, but it let me adjust everything else about the material properties. Supposedly it works on 1.1.3 and I'm trying to revert mine back but no luck yet! With this you get to take a very easily useable printer and give it some nice versatility by allowing you to use any filament you can get to work, not being stuck with what xyz puts out! Great job!

  • 2 out of 2 people found this review useful.
Grade 
08/09/2015

Best product for XYZ OWNER

easy to install, easy to use , it make my DA VINCI back to life ! THANKS WCTECK!

Grade 
07/31/2015

You must have a ZEROCART for a Davinci

I have a Da Vinci 2.0.J. I blocked the internet then methodically followed the instructions. The results were as advertised, I am very impressed.

Grade 
06/29/2015

No more software hacks

I have been using my Davinci 1.0 for over a year and like most people, after a week or so I was re-coding gcode files or resetting old empty cartridges and using other filaments.
This has made it so I can just load up the model and hit print, which is a big load off for most simple prints and still allows me to play with other slicers when I want to.
I have been down the repetier firmware track and although it opened the printer up I found that you couldn't beat the factory firmware for it's simplicity, especially with calibrating and nozzle clean etc.

This is definately a must for anyone who wants to get the most out of their printer, and a great little tool for those who are tired of using multiple steps to complete a simple task.

Grade 
06/21/2015

perfect addition to deviance printer

Worked flawlessly out of the box. Nice to not be locked to proprietary filament. Using firmware 1.0.1 and no issues. Had some problems when putting temp beyond 235 when trying nylon, had to reset eprom to factory but lowered temp and back in action. What is the max safe temp on the Davinci 1.0

  • 1 out of 1 people found this review useful.
Grade 
06/08/2015

Works Great

This is working on my Davinci AIO firmware version 1.1.15. I had to use the older version of XYZPro and designate the proper COM port. This is a great little device and has taken away the limits of this printer. Great work WCTEK!!!

Grade 
05/29/2015

Does what it says on the tin

Fantastic bit of kit. I'm not remotely techi and thankfully do you don't need to be. This is literally just plug & play, had it working in under a minute out of the box. Take note UK customers, you gonna get charged an extra £17 in custom fees for delivery on top of the stated delivery charge though!

Grade 
05/14/2015

1.0.6

is it works with davinci 1.0 on 1.0.6 firmware

  • 1 out of 1 people found this review useful.
Grade 
05/12/2015

Davinci Duo 2.0A w/ Firmware 1.0.B

I was hesitant to buy this resetter for my davinci duo because of the conflicting forum posts regarding the new board and firmware. I am glad to report the the filament resetter and temperature changer work beautifully, the davinci reads 240m no matter how much I print (No it does not count down)
*For those using Simplify3D, flash the stock setting under "Generate Epprom" and make your changes accordingly in S3D.

  • 1 out of 1 people found this review useful.
Grade 
04/26/2015

I own 2 now! XYZEROCART is a MUST

The XYZEROCART makes full temperature control of the extruder and bed so easy, but most importantly to me, IT IS RELIABLE!.I make function parts and enclosures so my prints must be perfect. I print nylon, soft PLA, and ABS from a variety of manufactures. I also print conductive ABS. I've use the XYZEROCART on 1.0 with firmware 1.0.1 and on a 2.0 with firmware 2.0.J. I have 4 Da Vinci printers now and the XYZEROCART works perfectly on all of them. Thanks guys for a great product!

  • 2 out of 2 people found this review useful.
Grade 
04/07/2015

XYZerocart

I finally ran low on my XYZ proprietary filament and got the change to put in my XYZEROCART. Popped it in and it worked instantly allowing me to finish using the left over filament from my XYZ cartridge. I'm looking forward to trying the software next.

Grade 
04/03/2015

bob

I have the AIO scaner/printer combo Ver 1.1.4 and alls well, best thing I have ever bought, using PLA 188 extruder/ 42 bed temps
works like a dream, running XP for printing, SP3 - and a lappy with win8.1 for scanning, but do more printing than scanning.
prints are just great, I pull the plug on the internet before using the davinci software.
TIP: if the bluetooth XYZPRO wont connect, try inputing the outport port manually, IE: COM9, also try different older versions of XYZPRO
mine is XYZZEROCART V 1.06 ALL THE BEST

Grade 
04/02/2015

xyzerocard

Hi IT is very good. The xyzerocard run by me White a davinci 1.0 aio and Firmware 1.1.3.

Grade 
03/31/2015

bob

Brilliant piece of kit, working with print/scanner combo ver 1.1.4 AIO. and with XP sp3 .net40.
had to go through the xyzpro versions from the web site, and got one to connect, but I think its more of a NET4 issue, as the computer connected 1st time to the zerocart, just getting the terminal/usb ports to talk, but half an hour in and its all working, Great Stuff.
Using larger 1kg rolls of PLA and 40d bed with 188d extruder temp, rather than the 220/180d as per the Davinci stuff..
no smell/no curlups brilliant, worth nevery penny

Grade 
03/24/2015

Works on Da Vinci 1.0A 3D Printer with 1.0.5 firmware

Works great.
Shipping sucks via USPS for Houston, should have used UPS.

  • 1 out of 1 people found this review useful.
Grade 
03/23/2015

thanks

Easy setup took me about 20 min.
Use Zero cart control panel 1.0 this works great and manually choose your BT com port don't do auto search, other than that great product and cheap.

Grade 
03/13/2015

Awesome!

I love this cartridge! Worked perfectly first time. Highly recommend to anybody with a Da Vinci.

Grade 
03/02/2015

Works with 1.2.5 Firmware !

I got this to work first time, using a terminal program on my android phone to talk to it, and as long as I DONT use xyzware, I wont have to downgrade my firmware... LOVE THIS BIT OF TECH!

Grade 
02/19/2015

Higher quality prints due to XYZeroCart

The XYZeroCart works perfectly with the 1.0A printer hardware running 1.0.3 firmware.
Now I can adjust the extruder and bed temperatures as desired which has dramatically improved the quality of prints.
Not to mention the ability to use other filament such as Transparent colors, clear and colors that XYZ does not offer. I appreciate the fact that the XYZ chip in the cartridges are there for ease of use to some degree but a $15 digital scale can tell you how much filament a spool has left by tracking initial weight and a simple test of that filaments weight per foot or yard.
Added with a WiFi USB hub so now there are no wires between my PC and printer and I have the printer in another room where the noise and smell are not an issue. All this thanks to XYZeroCart!!!

Grade 
02/10/2015

Great !

You are the best ;-))

XYZEROCART works fine with my Da Vinci AIO . The best utility what i can have for my money !

Thanks !

Walt
from Munich / Germany

  • 1 out of 1 people found this review useful.
Grade 
02/09/2015

thank you

Very easy installation. Works first time.

Grade 
02/08/2015

XYZEROCART

got to say i was a little hesitant in buying this since i saw conflicting post elsewhere that the resetter didn't work on the newer printers. But it in fact does. Very happy i went this rout. Thanks

Grade 
02/06/2015

Mary

Great product. Just bought the xyzerocart and it works great. No more need to use davinci filament. Thank you

Grade 
01/30/2015

OK su Da Vinci 1.0.3

Tutto ok, connessione a primo colpo!

  • 1 out of 1 people found this review useful.
Grade 
01/19/2015

XYZerocart

I'm very happy with my XYZerocart, I'm using it on my DaVinci 1.oa with the 1.03 firmware and it gives me control over my extruder and bed temps as well as spoofing the filament counter. Now I'm using what ever filament I choose.. Thank you WCT and keep up the good work.

  • 1 out of 1 people found this review useful.
Grade 
01/19/2015

Love this thing!

I had some difficulty getting everything to connect up, but I kept at it and after 3 tries it worked just as advertised. I've already printed several items using non-XYZ material and everything was fine.

Grade 
01/11/2015

The first and only accessory you'll need to get the most from yo

I own a newer (1.0.1) style unit (hardware 1.0A, based on the AIO). This cart works with this printer flawlessly. You don't know what you're missing until you free yourself from the XYZ filaments and use real, quality filaments from other suppliers. You will recover the cost of this cart after buying around 6-7 spools, and your print quality will be better from the minute you begin to use it ( and tune the temperatures to the optimum specified for your filament of choice - generally the product info or folks in forums will specify a "sweet spot" for a particular brand and color ). If you buy only one accessory for your printer - make it the XYZEROCART. Seriously, it's that good.

  • 3 out of 3 people found this review useful.
Grade 
01/04/2015

works on firmware 1.0.3 - 1.0A model

at first i had problems getting the software to connect to the zerocart even tho the computer found it with bluetooth.

contacted support who went thru my settings and continued to help me till we were finally able to get it to connect. had to be a computer issue since im on windows 8

Its working great now connects every time no more over priced DA Vinci Fillament

  • 1 out of 1 people found this review useful.
Grade 
12/29/2014

Best upgrade for my Da Vinci

I ordered this right after I ordered my Da Vinci 1.0. I printed two small demo pieces with the DV cartridge, and then plugged the xyzerocart in and have been using much more affordable reels of ABS since! Many people have shown interest in my Da Vinci, and I always tell them to make sure they order an xyzerocart to go with it!

  • 1 out of 1 people found this review useful.
Grade 
12/27/2014

XYZ Screw No More

This product is the final death nail to the screw tactics of XYZ. With the right version of firmware, you can control the extruder temperature allowing the use of any type of filament. Telnet on my older PC became a bit troublesome, so I used a Bluetooth app on my android phone to control the xyzerocart. Super easy to install. The written and youtube instructions appear to assume you will be using Bluetooth. This is a must buy!

  • 1 out of 1 people found this review useful.
Grade 
12/24/2014

Works Great

I just received mine and it works as advertised. For those wondering, this works on the newer Da Vinci. I have with firmware 1.0.3 - My printer is the 1.0A model per the display.

  • 1 out of 1 people found this review useful.
Grade 
12/23/2014

Payed 100 and saved 100's

This little beauty has just saved me hundreds in the long run. It was really as simple as the videos. Plug, then play! I Had to reflash the firmware but the newest update was messing with the printer anyways. I have messed with the settings and PLA prints nicely, and so does ABS. But, ive also been able to print with Nylon and ninjaflex which is just awesome.

  • 2 out of 2 people found this review useful.
Grade 
12/21/2014

kiwi using zero cart

We bought our zero last month and got it to work using the supporting docs.
Does what says it will do.

  • 1 out of 1 people found this review useful.
Grade 
12/09/2014

i want want want

When is this product going to come back in stock cuz I'm going to buy it for my kid for Christmas.

  • 1 out of 1 people found this review useful.
Grade 
11/15/2014

Zeroxyzcart

Works really good.

  • 1 out of 1 people found this review useful.
Grade 
11/11/2014

Excellent product!

Works as advertised! Awesome pre-purchase support. This little critter allows me to use Hatchbox ABS filament which is less than half the price per gram than XYZPrinting filament on Amazon.

  • 1 out of 1 people found this review useful.
Grade 
10/28/2014

Terrific add-on

Clever, straightforward, and robust DaVinci upgrade that greatly increases the printer's flexibility and improves results.

  • 1 out of 1 people found this review useful.
Grade 
10/25/2014

Outstanding !

Words cannot describe how happy I am with this product. Works perfectly, the first time, and I do not have to mess around with resetting carts, fishing them out, flakey connections or games played by the manufacturer. Best add on for my printer.

  • 1 out of 1 people found this review useful.

Write your review !

Write a review

XYZEROCART

XYZEROCART

The XYZEROCART is a bluetooth enabled box that connects to your Da Vinci printer and removes the need to have a cartridge permanently inserted in the cartridge bay, freeing up space to use your own spools. Plug and play. Works with Da Vinci Firmware 1.0.G - 1.0.J and Da Vinci 2.0.J (dual cartridge support).

Write a review

Frequently Asked Questions

  • Is this compatible with my DaVinci XXX firmware version x.x.x ?
    The XYZEROCART (and all the resetters for that matter) is compatible with the DAVINCI 1.0 FW 1.1.G, 1.1.I, 1.1.J + DAVINCI 1.0A FW 1.0.1, 1.0.3 + DAVINCI AiO FW 1.1.1 + DAVINCI DUE FW 2.0.J. If you have a DAVINCI 1.0 with firmware 1.2.3 you will need to downgrade to 1.1.J (see DAVINCI_1_0_RESET.zip in the download area). Regardless of what firmware you use, you need to block xyz.exe (the XYZWare app) with the windows firewall since it spies on your printing habits and can disable the cartridge. Blocking the xyz app is easy, just google "how to block exe with windows firewall", or if you're using a Mac, simply use littlesnitch to block the access.
  • I recently bought an xyzerocart and it's working as advertised. Firmware 1.0.1 with software 1.1.33.3 but in order to get it to recognize the new 'cartridge' I had to remove the block in my firewall and allow it to connect to the internet. I'm worried that the next time I reset the filament length and it creates a new serial number I'll have to do the same and they'll tell me 'no soup for you'. What software version should I be using that works with fw 1.0.1 and doesn't 'phone home' on new cartridges? And does anyone have a download link for that software?
    Version 1.1.33.3 is notorious for doing this. Please either downgrare to 1.1.32 or upgrade to 1.1.34 (download it from the REPOSITORY on the site) and then block the xyz.exe with the windows firewall as you did before. You need to check and block the xyz.exe every time you install a new version of XYZWare.
  • I am waiting on delivery of my Davinci 2.0A Duo. Can this product work in it? The video only showed settings for 1 extruder. Also should I run the initial installation setup before I get product? Philip
    This product is designed for the DAVINCI 2.0 but it works equally well on the 1.0, 1.0A and 1.0 AiO. It has 2 separate memory banks for 2 concurrent cartridges. The only thing to do is to block the xyzware app with the windows firewall (or littlesnitch on a Mac) to prevent it from accessing the internet.
  • Has this been tested on a Da Vinci 1.0 Ai0?
    Yes. It has been tested with firmware 1.1.1.
  • I have an AIO 1.1.3. WIll it work for this version?
    Yes (tested by one of our users)
  • hi, would using this allow me to print using PLA rather than ABS? thanks
    Yes, it will set the PLA flag and allow you to set higher temperature. Please be careful when setting higher temperature and limit the time you set them at around 230*C to avoid possible extruder damage.
  • I just thought I would share that I have tested it on da Vinci 1.0 AiO with Firmware version 1.1.3. So far it seems to be working great.
    Thank you! That's great news.
  • Has this been tested with latest firmware version (1.1.3)?
    Yes it has and works fine (both 1.1.1. and 1.1.3).
  • WIll it work for this version? DAVINCI DUE FW 2.0 with firmware System version 1.0.D
  • Where can i find the XYZEROCART for Mac
    on the Mac, you use a serial program to connect to the COM port of the xyzerocart. Press ? in the terminal to bring up the menu. A terminal program called CoolTerm is available in the download section. Your documentation should give you direction on how to set it up.
  • will it work on a 2.0a with 1.0.D firmware, if not what should i go down too?
    firmware 1.0.D is untested. Please check the voltivo.com forums to see if any one else has used it on 1.0.D

If the question you have has not yet been answered here, use the form below to ask something about this product.

(Required to notified you when an answer is available)
US