XYZ Resetter v2 View larger

XYZ Resetter v2

XYZAP!V2

New

XYZAP! v2 Fully Assembled & Tested with enclosure and push-button

More details

$59.95

More info

Can't be bothered building the 240M filament resetter yourself? This version of the XYZAP! comes fully assembled and tested and it has a push-button on its enclosure for a quick start (no more messing around with batteries and wires). Includes LED indicator to show when it is in operation. You will receive a short-form instruction page with it explaining the LED flash patterns.

Works with version J firmware!

New Design Features: Enclose Push-Button, Chome-Plated battery clips for easy replacement.

Reviews

Grade 
09/16/2016

great

took some time to set up but works great and saves me lots of money.

Grade 
09/16/2016

Works like a charm!

Easy to use, design is excellent, reset in 1-2-3.

Grade 
08/28/2016

works really well

reset the old chip with no problem

Grade 
03/13/2016

xyz resetter

the part is working very well and the service and delivery is spot on thank you.

Grade 
02/19/2016

Works Great!

Works as advertised.

Grade 
01/12/2016

Compatibilidad

¿puede confirmarmem que sirve para la da Vinci 2.0 duo con firware 2.0.1 y software XYZware 2.1..5.5?. Gracias

Grade 
12/10/2015

Works as advertised!

Followed the instructions, rolled back my firmware and blocked xyz.com and it works fantastic! Thanks for the great product!

Grade 
11/08/2015

This product worked very well.

I am very happy with this product and it will save a lot of money.

  • 1 out of 1 people found this review useful.
Grade 
10/25/2015

XYZAP! v2 in the UK

Bought this with mild trepidation as postage was a lot of money to ship to me in the UK but was totally thrilled when it arrived and worked perfectly. Great idea and solves a very pressing issue for me. Would recommend.

  • 1 out of 1 people found this review useful.
Grade 
09/21/2015

Fast and Perfect!

With standard shipping got to me in 3 days. Works amazing with 2.1.6! Its a must have. Now Im happy using my 3rd party filament. Now i just wish I could try a different one with more features to see if that works with my firmware.

  • 1 out of 1 people found this review useful.
Grade 
09/15/2015

SIMPLY AMAZING!!!

I have an XYZ DaVinci 2.0 due that like a tard upgraded it because i had issues and made the mistake of calling XYZ. Well this works like a CHAMP on System Version 2.1.6!!! Must Have device! Now I can keep buying the cheaper filament off eBay!!!

  • 1 out of 1 people found this review useful.
Grade 
08/30/2015

Good so Far

I have used it on one cartridge so far. Works well. Hopefully it continues to work this well.

  • 1 out of 1 people found this review useful.
Grade 
08/25/2015

xyz resetter

it took 3 weeks to get this to me!!!!
but it works like a charm... love it!! im printing using inland 2lb spools. awesome!!

  • 1 out of 1 people found this review useful.
Grade 
08/11/2015

Xyz restore v2

Great product. It was tight in the cartridge at first. Does the job nicely

  • 1 out of 1 people found this review useful.
Grade 
08/11/2015

Mr

Good product, brilliant service.
A first class company to deal with.

  • 1 out of 1 people found this review useful.
Grade 
08/03/2015

Awesome product

This worked perfectly. Great enclosure as well!

  • 1 out of 1 people found this review useful.
Grade 
07/30/2015

ok

perfect

  • 1 out of 1 people found this review useful.
Grade 
07/21/2015

A++ MERVEILLEUX !! JE LE RECOMMANDE

MERVEILLEUX RECU HIER ET IL A DEJA COMMENCÉ A SE REPAYER ! FONCTIONNE BIEN AVEC LA VERSION 1.0.6 ET LA DERNIER VERSION DE XYZWARE ( AVEC FIREWALL BLOQUÉ )

Grade 
06/26/2015

Mr.

Great Product. I have firmware version 1.2.7. But it still reset the counter without downgrading firmware.

Grade 
06/24/2015

Mr

I have XYZ printer 1.0 and firmware updated version 1.2.3: suggest not to downgrade, before all use:the resetter on cartridge and put inside the printer, switch on printer, firewall on computer XYZ applications or better disconnect internet, connect pc via USB and print, it work me like.... now I pay filament 5 times less than original :).

Grade 
06/17/2015

super

20secondes et c est raparti

Grade 
06/14/2015

Works great

Bought this for my XYZ AiO Printer/Scanner and it easily updates cartridge filament counter with no need to change printer firmware (currently v1.1.5 firmware)

  • 2 out of 2 people found this review useful.
Grade 
06/08/2015

as described

Got this because I had a cartridge with a bad chip and the roll was just about full got 2weeks of run around finally I said let me try this .
I had a another cart empty with good chip so I tested it with this device and it worked as advertised now I use whatever filament I want thank you.
.

Grade 
06/01/2015

Excellent product!

Excellent product, nicely designed very intuitive and easy to operate

  • 1 out of 1 people found this review useful.
Grade 
05/17/2015

Works Great!

Perfectly Works !

Grade 
05/15/2015

Awesome product, worst delivery time...

The re setter worked without a single issue the very first try... Did not have to mess with firewall setting etc. Shipping speed is another story and hate USPS. Do you believe it took 7 days from Texas to Minnesota? Pathetic...

  • 1 out of 1 people found this review useful.
Grade 
05/14/2015

it works

am so happy it works this has already saved me $300 in 2 days so worth spending the 42 bucks

Grade 
05/07/2015

Works amazing!

Got mine in 4 days and it worked perfectly. Took about 3 seconds to reset the cart and I have been using my own filament ever since.

Grade 
05/02/2015

good service

Ordered this to get out of the money sucker hole Da Vinci created. Very happy with this product and the printer just not happy to be forced to use a particular filament that is dodgy quality at the least

Grade 
04/28/2015

So easy

Works as easy as advertised. Fantastic produce, which will more than pay for itself in no time at all.

Grade 
03/17/2015

Very Happy

I received my XYZAP today and have tested it. Works %100 Very happy with the product and would highly recommend.

Grade 
03/14/2015

So easyyy !

Super ca marche tres bien !
Recu en une semaine et demi ! Rapide vu la distance :)

Grade 
03/12/2015

Excellent Product

Great service, great communication.

As an average computer user I was put off at first by the fact that I had to touch the tiny pins of the circuit board. I decided to give it a go after numerous youtube video on downgrading firmware.

I followed the detailed and clear documentation from Wctek without trouble and downgraded the printer firmware in 5mins.

I can now use decent filaments which is 50% the cost of the original..yeah..happy 3d printing....

Thx Wctek

Grade 
03/10/2015

Da Vinci 1.0A

Great service guys, thank you.

I have reset the original (empty) cartridge that came with the printer, re-seated it back into the printer and it reads 240M. I have not tried a non Da Vinci filament with it yet as I'm waiting for delivery.
After resetting the cartridge, I installed a brand new Da Vinci cartridge and it reads as 240M, I thought they only had 120M on them ... can anyone confirm this?
Firmware version 1.0.3
XYZWare version 1.1.34.7 (Firewalled)
Win 7 64bit

I will report my experiences when I get some non Da Vinci filament.

  • 1 out of 1 people found this review useful.
Grade 
02/28/2015

Profesor

I ordered the wrong itme.
They refunded my money FAST.
Many Thanks

Grade 
02/06/2015

Worked!

Used this device and it reset the 3D printer counter to full. Now using other brands of filament. Thanks for a great product.

  • 0 out of 1 people found this review useful.
Grade 
02/03/2015

NICE PRODUCT

Thanks folks at WCTEK! The V2 product works great. I'm looking forward to your Newsletter. I'm not printing toys with the XYZ but actual parts used in a prototype product. So my applications are for real parts in machines. Once we prove out the part we may modify the design to save material yet get the form function. Thanks again for a great product!

  • 1 out of 2 people found this review useful.
Grade 
01/14/2015

Nice - works

simple apply and hold button till green light comes on and then goes out about 3 seconds. Order was fast.. No problems

Grade 
01/12/2015

XYZ RESETTER V2

Thanks guys! Everything works perfectly as described. You have saved me heaps of money. A credit to you all for the compact design and programming involved :)

Grade 
01/05/2015

Earl Gray

Ordered on Boxing day arrived 3rd Jan faster than Amazon orders for next day and more importantly worked. If i had known about the issues with XYZ cartirdges I probably would not have ordered the printer but this has saved me so much hassle and cost. Worth every penny!

Grade 
01/02/2015

Works great.

So, when I received this product in the mail, it had a detailed letter warning me about the XYZ preventative measures that have been created to prevent its use. Had I not been warned by the letter, I would not have known it was an issue. Just a few days before receiving it I had let it upgrade its firmware, big mistake, and soon as I read the letter I knew so. Thankfully, there instructions in the letter that would help me fix it. It was surprisingly easy to roll back the firmware. Now I am printing again thanks to the resetter. I bought 2 print cartridges, one of which was in the machine when it had 1.2.3, and as a result it cannot be reset, period, even after rolling the firmware back, that particular cartridge cannot be reset. Fortunately I have one that was not in the machine when it was at 1.2.3, so I can still reset this one now that I have rolled back to J. The downgrader utility did not work for me, but I just used the bossac.exe and the bin file, and it worked fine. I first came across this device on a diy site, realized I could build one myself for just a couple of dollars of parts, but I am glad that I came here and bought one, got it to me faster when I needed it the most, and it allows me to support the developer who is actively involved and providing updates and fixes as XYZ tries to stop it from being effective. Thanks a ton fr333n3rgy!

  • 3 out of 4 people found this review useful.
Grade 
12/30/2014

Prefeito

Quero aqui deixar os meus agradecimentos pelo profissionalismo da WCTEK sempre deram todo o soport ao cliente muito obrigado Alex pelo o appio e o teu profissionalismo .
Em questão ao resseter ele funciona as mil maravinhas com a nova versão 1.0.3 vou poupar muito dinheiro e ja estou a pensar em comprar o Model XYZEROCART1 .

  • 2 out of 2 people found this review useful.
Grade 
12/23/2014

Bye Bye XYZ filament

XYZ resetter v2 arrived in the post today.
All my cartridges were reset within minutes.
Have ordered filament from ebay for
1/3 the price.
Very happy customer thanks WCTEK.

  • 1 out of 1 people found this review useful.
Grade 
12/15/2014

Pays for Itself!

The re-setter worked perfect and paid for itself within the first two roles of non XYZ filament I order. Great Hack!

  • 1 out of 1 people found this review useful.
Grade 
12/08/2014

XYZ Resetter

I ordered my resetter and received it three days later. I must say the pictures of it don't do it justice. It's a lot better constructed then I thought it was going to be. After going through the steps of the firmware and software downgrades, which was easy enough. I tried the resetter for the first time and it worked perfectly and just as described. I put the cartridge in and sure enough, it was reading at 240M. My printer was saying it was empty. I opened the cartridge and measured 90 feet left in it. So for this one, the savings are already adding up. If you are sitting on the fence wondering if you should get one of these, then may I make a suggestion; Once the printer says it's empty, open it and see what's really left that "They" want you to toss out.

All in all, this worked exactly as described. It reset the counter in a few seconds and I was on my way again. In the time I've owned it, I have "Used" the three cartridges I bought. Then refilled each of them with no issues.

  • 2 out of 2 people found this review useful.
Grade 
11/27/2014

great!!!

i got it in the mail 3 days after order and it works exactly as it should it really great using non crappy filament it really brought out the quality in the prints 10/10

Grade 
11/22/2014

Amazing Product!!!

I would first like to say that after much research, your product is the reason why I purchased the XYZ Da Vinci. They should be thanking you for providing a solution to their limited proprietary cartridge... Your shipping was extremely fast, and even arrived before I ran out of my starter cartridge. The product is Amazing, very easy to use and worked Great!! Thanks

Grade 
11/22/2014

Works

First the light didn't goon, but after a few tries, it worked and I got 240 m.

Grade 
11/22/2014

Works Great

Works Great. Love it

Grade 
11/15/2014

Best "fix" ever!

I originally ordered the V1 resetter with nnthe intention of building it when i emptied my first cartridge. While waiting, there were many changes to firmware and XYZware... by the Tiwan based company.
After the battle died down and WE won, I looked and there was anew resetter model; pprebuilt! Ijumped on it and have been using 3rd party filament by the KG.
There are now newer models. Which ever you choose, you will be very pleased.

NOTE: Resetter customer service is better than any Manufacturer I have ever worked with. Puts XYZ Corp to shame! :-)

Grade 
11/10/2014

It really works!

Just tested it, and it works. So easy.
Used my original cartridge, and now it says 240m/240, really nice.

Grade 
11/02/2014

XYZAP V2

Fast delivery and works great, the reseter will pay for its self in no time.

Grade 
11/02/2014

A best buy for resetting Cartridges

This is a great tool. It WORKS! Zap your empty cartridge, install it in the printer. Turn it on, and use any ABS filament COLOR You want! I printed in glow-in-the-dark for Halloween toys for my grand child.

Grade 
10/31/2014

GREAT ALL AROUND

Worked perfectly, got to me so fast, now problems at all really does work very, very good. Definitely recommending to anyone with an XYZ printer. Thanks again.

Grade 
10/28/2014

Like a Charm!

Works as advertised. I purchased the assembled version. Finally ran low on filament and was eager to verify the resetter would do its job and it did with flying colors!

I only bought one roll of filament initially but now I will order a few more rolls in different colors.

This makes the DaVinci worth every penny I spent on it.

Grade 
10/23/2014

Very liberating

This clever little device opens the DaVinci up to printing third-party (and more uniform quality) filaments. It does what it claims to do and works like a charm.

  • 1 out of 1 people found this review useful.
Grade 
10/20/2014

Worked as discribed

Worked as described ,I just waited 16 days for shipping to Ohio thought it got lost! would have paid for two day shipping!

Grade 
10/11/2014

Worked as advertised!

Needed to reset the counter on my XYZ cartridge so I could use other filament. This did the trick! Thanks!

Grade 
10/06/2014

Life Saver!

As a new business owner specializing in cosplay and anime this little device has already saved me it's cost over and over.

Grade 
09/25/2014

Awesome Product

I have been very happy with my printer and until recently had been paying the slightly inflated prices for filament. I was looking around for upgrades and mods people have done with the da vinci printer and was very happy to find this company. I ordered the product and in less than 6 days the part was delivered. The construction is pretty cool considering WCT prints them out! Perfect fit to the cartridge. Easy to use. Buy the filament you want to use on a 3lb roll and insert your xyz cartridge in the printer. When the printer says the cartridge is empty, just reset it. I have my spools mounted above the printer and fed in through the back so it still uses the alignment tubes. There are tons of custom filament brackets for the printer on thingiverse. Thanks a bunch to these guys. As a side note, not all abs is created equal. Im using some stuff I got from RoBO 3d from when i purchased their printer. They wouldn't take the abs back when i returned the printer so i just kept it and figured i would use it later. I have had mixed results with it... Nothing like matter hackers abs. Be aware of the stuff you are buying before you waist 15 hrs in a print to watch it go to heck.

Grade 
09/14/2014

Works great and as expected!

Finally got my resetter and it works perfectly. Nice build quality, snapped in easily, within a couple seconds it was done. This little device opens the door to all kinds of filament instead of only XYZ brand cartridges. I reset my original white starter cartridge, left it empty and put it back in the printer, and now have a fresh spool hanging on the back, feeding in through the lid and case.
Very easy to use, mine showed 240/240m.
Thanks!

  • 2 out of 2 people found this review useful.

Write your review !

Write a review

XYZ Resetter v2

XYZ Resetter v2

XYZAP! v2 Fully Assembled & Tested with enclosure and push-button

Write a review

Frequently Asked Questions

  • Does the xyzap v2 also work with fw 1.0.1? Or the xyzpro?
    All of our resetters work with 1.0.1 and 1.0.3 (for that matter, they work with all Firmware versions excluding 1.2.3). If you have version 1.2.3 you can easily downgrade back to 1.1.J using the DAVINCI_1_0_RESET.zip from the download area. The only thing you need to do is block xyz.exe with the windows firewall. To do this, google "how to block exe with windows firewall" - it's very easy. Once blocked, you'll be able to reset the cartridge as many times as you want without XYZWare nagging you or possibly lock the cartridge.
  • Can this brick the printer or break it?
    The XYZAP! v2 is locked to factory temperatures (it is a filament resetter which will reset to 240m). However the XYZPRO, XYZAP! v2+ and the XYZEROCART gives you the freedom to set any temperature you want, therefore you should be aware that setting temperatures beyond what is supported by the printer may damage the extruder or heated bed. We suggest that you do not exceed 225*C for the extruder and 110*C for the heated bed for prolonged periods of time.
  • I am looking at buying an XYZ Davinci 1.0. Can this reset device be shipped to the UK ?
    Yes, we ship to UK all the time. It takes approximately 15 business days (not counting Sat/Sun). Sometimes it gets quicker but usually is around 15 days - if you're in a hurry, you may want to consider choosing the faster shipping methods (see the options at checkout).
  • With this work with firmware 1.0.1 and software 1.1.31.7 on a davinci 1.0?
    Yes, 1.0.1 is fully supported. You still however need to block the xyz.exe application with the windows firewall (or littlesnitch on a Mac) since it contains tons of spyware.
  • I have two DaVinci 1.0 printers, one that has been updated to firmware 1.2.3 and the newer one still has 1.0.3. I'm using these with a MacbookPro, which is running version 1.1.1 of the Mac version of the app. I had no problem with resetting the cartridges twice, for each machine. I just tried a third time and both machines report an error in the app, when I try and print, and won't let it continue. Is this the same issue that blocking the app in the Windows firewall fixes? If so, is there a way to do the same thing with the Mac version? I was able to take two other empty cartridges and reset them, and both printers are working again. Is there a way to fix the two that no longer work?
    As long as the xyz.exe is blocked by the firewall you should be ok. If you upgrade the app, you will need to block it again (you need to block the app every time you install a new version).
  • If I can use 1.0.5 firmware
    Users reported that 1.0.5 is compatible with the resetter
  • If I update the firmware of the Da Vinci 1.0 this product will not work?? My printer is not working well with the firmware 1.1.J
    1.1.J is what we all use -- you can't go higher as 1.2.3 and newer will lock the resetter. I can assure you that the firmware is NOT the effect the quality. It is a common misconception that upgrading the firmware will make better prints. It's all in the slicer (xyzware).

If the question you have has not yet been answered here, use the form below to ask something about this product.

(Required to notified you when an answer is available)
US